Need a hand? Email support@mentalmetal.app and a human (Gareth, who built it) will get back to you — usually within a day or two.
A no-fuss workout timer for functional fitness: AMRAP, For Time, EMOM and Tabata, with voice cues loud enough to hear across a garage gym. Set your time, hit start, work. On iPhone, iPad and Apple Watch, and on Android phones and Wear OS watches.
The screen turns off mid-workout. Since version 1.3 the timer keeps your screen awake for the whole workout, with no setting to forget. If it still dims, email us and say which phone you're on.
What do the beeps mean? Since version 2.1 the timer sounds like a gym clock. Three low beeps count down the last three seconds of every phase (the get-ready, each EMOM minute, each Tabata work and rest, and the end), then a high beep marks the change with the coach's call on top of it. Beeps only keeps every beep and drops the voice. Since version 2.5, two quick pips also mark the middle of every EMOM round and every Tabata work block (and the halfway point of an AMRAP or For Time clock); the white ticks on the setup timeline show where they land. There is no setting for them: they are part of the clock, and Silent mutes them with everything else.
I can't hear the voice cues. Tap the voice chip on any setup screen and check it isn't set to Silent (no sound at all) or Beeps only (no voice), and that your media volume is up. Cues play even with the ringer switch on silent.
A beep or a voice line went missing. Since version 2.5.2, a cue your phone cannot load is skipped on the beat instead of playing late over the next one, and the cue after it plays as normal. One missed cue is nothing to fix. If they go missing often, check the media volume and the voice chip, then tell us your phone model in Settings under "How is Wharf WOD working for you?".
How do I run a whole class in one go? Since version 2.6, Today's WOD chains blocks into one session. Tap + NEW on the Today's WOD card on Home, or + THEN on any timer's setup screen, then + ADD BLOCK for each part: any of the four timers, a Rest, or Sets. Drag a row to reorder it, tap it to change it, swipe it to remove it. START runs every block in order. Each timer block gets its usual get-ready, which names what is coming, and a tap skips a Rest or a get-ready. Home keeps your last session, so tomorrow it is one tap to open and START.
Do I have to press START to keep my changes? No. Since version 2.6.1 every change you make in Today's WOD is kept as you go: add, edit, reorder or remove a block, then go back, and the card on Home shows the session as you left it, even after you close the app. Remove every block and the card goes back to empty. Opening a session and backing out without changing anything leaves it as it was.
What is a Sets block? It is for strength work, where you lift at your own pace. The screen shows which set you are on. Tap SET DONE when you rack the bar and your rest counts down, with three low beeps and a high one to call the next set. There is no rest after the last set. The phone (or tablet) runs the session; the watch apps still run single timers.
Does Today's WOD keep a history? No. Your results are on the end screen: the total time and one tile for each scored block. The app remembers only the last session itself, so you can repeat it.
How do I stop a workout early? Tap PAUSE in the bar along the bottom, then hold HOLD TO STOP. The hold means a stray tap can never end a workout mid-rep. On For Time, FINISH sits beside PAUSE and logs your time.
I counted one round too many in my AMRAP. Fix it on the end screen: scroll the round count up or down, like a wheel. Tapping the clock counts a round, and a quick double tap only counts one.
What does the end screen show? Since version 2.5.1 the result sits at the top (your rounds, your For Time time, or rounds done), with three tiles under it: the time, one number for the workout (per round in an AMRAP, how far under the cap you finished a For Time, the interval of an EMOM, the work in a Tabata) and the time of day you finished or stopped. In an AMRAP the per-round time follows the count as you fix it on the wheel.
Why does my For Time say Time cap? When the clock reaches your cap before you tap FINISH, that's a time cap, not a finish, so the app says so instead of showing the cap as your time.
How does the Apple Watch app work? Since version 2.0 the watch matches the phone: each workout in its own colour, a timeline that fills as you go, and big buttons along the bottom. Turn the Digital Crown to set a timer, tap the screen to count an AMRAP round, and to end early tap PAUSE, then hold HOLD TO STOP. Every timer remembers your setup as you change it, Beeps only is one of the voices, and since 2.1 it counts you in with the same gym-clock beeps as the phone. Since 2.2 the watch keeps the timer running while your wrist is down (as long as it is running a Health session, see below), so every beep, line and tap lands and raising your wrist brings the clock straight back; GO is a double knock, 3-2-1 is a tap each, the last round three knocks. Since 2.3, EMOM and Tabata also have RUN IN WORKOUT under START: it hands the workout to Apple's Workout app, which runs the intervals with its own heart rate, calories, rings and alerts, and Wharf WOD stays out of the way.
RUN IN WORKOUT just shows the workout I already started in Apple's Workout app. Apple Watch runs one workout at a time, and the Workout app's own workout keeps priority: a workout that is already running stays, and the Wharf WOD plan is not started. End that workout first, then tap RUN IN WORKOUT. The same rule means our own timer cannot take over your wrist while an Apple workout is running; raising your wrist goes back to the Workout app, and since version 2.4 the watch alerts you at each change instead (next question).
Why does the watch app ask for Health access? Since version 2.2 the watch runs each timer as a workout session, which is what lets it keep going while your wrist is down. That takes one Health permission, to save workouts, so each WOD you time lands in Apple Health as well. The app reads no Health data and nothing leaves your watch. You can decline, or turn off Track workouts under Health in the watch app; the timer still works, and since version 2.4 the watch alerts you at each change while the app is off screen (next question).
The watch went back to the clock face mid-WOD, and the taps stopped. Two things are going on. Apple Watch returns to the clock face about two minutes after your wrist drops unless an app is set to come back: on the watch, open Settings, General, Return to Clock, tap Wharf WOD, choose Custom and turn on Return to App (it is listed once the watch has run a Health session from Wharf WOD). And a watch app can only keep beeping and tapping off screen while it runs a Health workout session, which Wharf WOD cannot do when Track workouts is off, Workouts were not allowed, or Apple's Workout app is already recording your class (a watch runs one workout session at a time, and the Workout app's keeps priority). Since version 2.4 the watch covers that case: when no session is running it alerts you at each round, rest and finish, one firm tap and a chime from the system, and a tap on the alert brings the timer back. The small icon at the top left of the timer tells you which you have: a figure for a Health session, a bell for alerts, a crossed bell for neither, which means the cues stop when the app leaves the screen. The alerts need the notifications permission the watch app asks for once; the Health page in the watch app shows where both permissions stand.
I had music on and the beeps stopped it. Fixed in version 2.2: a cue now lowers your music for the beep or the line and brings it back. If your Android player stays quiet after a cue, make sure you're on 2.2 or later.
Is there an Android version? Yes, on Google Play since August 2026, with the same four timers and voice cues.
Is there an Android watch app? Yes, since October 2026 the Wear OS app matches the Apple Watch one: all four timers with your last setups on the first screen (since version 2.5.2; Voice and Health are one scroll down), turn the bezel or crown to set a timer, tap the clock to count an AMRAP round, and PAUSE then HOLD TO STOP to end early. The beeps, voice lines and taps keep going while your wrist is down, and the workout shows on your watch face while it runs. Get it from the Play Store on the watch; it runs on Wear OS 3 and later.
Why does the Wear OS app ask for the physical activity permission? It is what lets the timer keep running, beeping and tapping while your wrist is down. The app reads no heart rate or other sensor data, keeps nothing about the workout, and nothing leaves your watch. If you decline, the timer still works, but cues then play only while the app is on screen.
Does the Wear OS app record a workout? Not by default. Since version 2.3 the timer runs on its own, so a workout you are recording in Fitbit, Samsung Health or another app keeps going. If you want the watch to count the WOD as an exercise, turn on Record as workout under Health in the watch app; a watch runs one exercise at a time, so that ends whatever another app is recording, and Wharf WOD stays out of the way if another app is already mid-exercise.
Why does setup already show my last workout? Since version 1.2 each timer remembers the settings you last started it with (your EMOM interval and rounds, your Tabata work and rest, and so on), so most days you just hit START. It's stored only on your phone. Change any number and the new setup is remembered the next time you start.
How do I set the time? For AMRAP and For Time, turn the stopwatch ring: one full turn is 60 minutes, in whole minutes. For EMOM and Tabata, scroll the wheels: EMOM moves in 15 seconds, Tabata work and rest in 5 seconds. The total shows on the START bar. Since version 2.5 the ring and the wheels are bigger and sit a little higher on the screen.
Why does each workout have its own colour? Since version 2.0, For Time is orange, EMOM pink, AMRAP blue and Tabata green, on Home and on the clock while you work. In Tabata, green is work and pink is rest.
Why did the app ask me to rate it? Only after a few workouts that ran all the way to the end, never mid-set and never when you end one early. It asks at most three times ever, never more than once in two months, and uses your phone's own rating sheet.
How do I rate the app or send feedback? In Settings, under "How is Wharf WOD working for you?": Love it opens the store page to rate it, and Could be better opens an email to us. Both are always there.
Something looks wrong or crashed. Crashes reach us automatically and anonymously, but an email with what happened helps us fix it faster.
The Wharf WOD Timer is built by one person and shaped by the people using it. If a missing feature would make your training better, tell us: support@mentalmetal.app.